Boot Settings Configuration - Asus P5N73-AM User Manual

2.6.4

Boot Settings Configuration

Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Full Screen LOGO
Halt On
F1:Help
ESC: Exit
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled,
the system skips certain tests while booting. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become
user-configurable only when the item Typematic Rate Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a
key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat. Configuration
options: [250] [500] [750] [1000]
2-34
Phoenix-Award BIOS CMOS Setup Utility
Boot
Boot Settings Configuration
↑↓ : Select Item
→←: Select Menu
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Enabled]
[All Errors]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Allows the system to
skip certain tests
while booting. This
willdecrease the time
needed to boot the
system.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup