Rear
High
1
Low
1. Cutting Height Lever
Figure 7
Swivel Wheel Models (911134)
To change front wheel cutting height, insert
height adjuster pin into the holes that match
the desired cutting height and fasten with key
ring (Figure 8).
To change rear wheel cutting height, move
cutting height levers one notch at a time to
set the desired cutting height.
Low
High
1
Front
OM0165
High
Rear
Front
1. Cutting Height Lever
2. Height Adjuster Pin
3. Key Ring
OPTIONAL CONTROLS
Primer Bulb (911132, 133, 134, 139,
141)
Push the primer bulb in to add fuel for easier
engine start.
Throttle (911102)
1
2
3
OL2074
GB - 11
Low
2
3
Figure 8
The throttle controls the
engine speed and chokes
engine for starting.
1.Start - Push lever all the way
forward.
2.Fast.
3.Slow - Pull lever all the way
rearward.
1
OM1270