Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual page 70

Troubleshooting
Problem
You cannot access
the MusicCAST preset
tuner.
Playback cuts off or
switches to another
input when listening
to a tuner preset on
the MusicCAST client.
Auto Configuration
does not appear to
work correctly.
105_Musiccast_E.p65
Cause
The ANALOG REC LEVEL on the front
panel of the MusicCAST server is set too
low.
The MusicCAST server AV receiver
parameters are configured incorrectly.
The AV receiver connected to the
MusicCAST server is not turned on.
The AV receiver is not correctly connected
to the MusicCAST server.
The AV receiver is not receiving a strong
radio signal.
Another MusicCAST component is
changing the tuner preset or external input
on the MusicCAST server.
There is more than one DHCP server
operation in the network trying to use the
same IP addresses.
70
Remedy
Increase the ANALOG REC LEVEL.
Configure the AV receiver parameters correctly.
Turn the AV receiver on.
Correctly connect the AV receiver to the MusicCAST
server.
Refer to the owner's manual of your AV receiver.
Stop the other MusicCAST component from
changing input sources.
Deactivate the MusicCAST server DHCP function.
70
2003.06.04, 16:09
Refer to
page
MCX-
1000
owner's
manual,
page 29
MCX-
1000
owner's
manual,
page 122
—
MCX-
1000
owner's
manual,
page 122
—
48 – 51
MCX-
1000
owner's
manual
page 110