Resetting The Musiccast Client To Default Settings; Resetting Your Musiccast Client - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual

8.
The MusicCAST automatically switches
itself off and then on again.
The update process is now complete. Carry out
the procedure described on page 63 to check the
version of the firmware.
104_Musiccast_E.p65 65
Resetting the MusicCAST client to default
settings
At times it may be convenient to return your
MusicCAST client to the default state it was in
when you first purchased it. You may wish to do
this in cases such as the following:
• When your MusicCAST client appears to be
functioning incorrectly for no apparent reason,
and reference to the troubleshooting section (page
68) is of no assistance.
• When you have made multiple mistakes in setting
the parameters on your MusicCAST client and
wish to start again.
• When you wish to reset the MusicCAST
completely for use in a different MusicCAST
network.
Warning
• Resetting the MusicCAST client to its default
settings will not reverse any updates to the
MusicCAST software that you have made, or
erase any data stored in your MusicCAST
network. It resets all settable parameters to their
server settings, so you need to set them to suit
your requirements after performing the reset
procedure. Note that in resetting all the
parameters, the MusicCAST client also resets its
network parameters, and disconnects itself from
your MusicCAST network.
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– VOL +
PHONES
I Resetting your MusicCAST client
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
MENU
65
2003.06.04, 16:09
System settings
OFF TIMER SLEEP
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
MENU
STOP
7
PLAY
S
PLAY
MENU
INFO.
PLAY
GROUP GROUP
SELECT
BOOK
MARK INPUT
RECALL MUTE
VOL
u / d
SELECT