Chapter 2: Getting Started; Loading The Battery - Toshiba CAMILEO Z100 User Manual

Chapter 2
Getting Started

Loading the battery

Before using the camcorder, you will need to remove the protective
film from the battery. To do so, remove the battery, then remove the
film, and replace the battery as shown below.
The battery comes pre-installed in the camcorder, however, you
must remove the protective film on the battery before use.
To properly connect the battery:
1 Slide the safety latch and open the battery / SD
(Sample Illustration) Opening the battery / SD
16
™
Card cover.
™
Card cover