Table of Contents
Advertisement
Loading the Battery
Before using the camcorder, users must load Lithium-ion
rechargeable battery
1.
Insert the battery following to the correct polarity marks
( + or -).
2.
Close the battery cover firmly.
Inserting and Removing an SD Card (Optional)
The camcorder comes with internal memory which allows you to store pictures and movies. You can
expand the memory capacity by using an optional SD memory card.
1.
Insert the memory card into the right position. Please
refer to the figure.
2.
To remove an installed SD card, press the card inwards
to release it.
3.
When the card pops out, gently remove it from its slot.
4.
Recommended memory capacity: 1GB or above
Note
•
When a memory card is fitted, movies/pictures are saved on card rather than on the built-in
memory.
•
Protecting Data on an SD Card: SD card is read-only by locking the SD card. No pictures
and movies can be recorded when the SD card is locked. Make sure the lock is on writeable
position before recording any media.
Getting Started
Writeable
7
Section 2
Write-Protected
position
Position
EN
Hide quick links:
Advertisement
Table of Contents
