Ports And Firewalls; Serial Connectivity For Use With Terminal Emulations And Telnet - HP Neoware c50 - Thin Client System Manual

10.3 Ports and Firewalls

To ensure THINTUNE communications to the firmware server and/or the management server beyond any routers of
firewalls you might need to have access to some special TCP/IP ports. This is a list of ports which might be needed.
Port
25704
25706
25707
25708
25710

10.4 Serial connectivity for use with terminal emulations and Telnet

In some cases hosts or other devices will we connected to THINTUNE´s serial ports. Serial connectivity primarily is
not supported by the built-in terminal emulation. However, serial connectivity can be achieved by using the
THINTUNE serial portmapper.
In a first step you need to configure the serial port with the Port Menu which is in the Device´s tab. A sample
configuration might look as this:
95
Service Communication
TCP Management Console to Management Server
UDP Management Server to THINTUNE Terminals
UDP THINTUNE Terminals to Management Server
TCP Interface Selector to Management Server
TCP THINTUNE Terminals to Firmware Server