Network Requirements - HP Neoware c50 - Thin Client User Manual

Installing HP Device Manager
Network
Requirements
14 System Requirements
The network should not contain any other running PXE servers. It
should permit free communication on ports used by HP Device Man-
ager. A number of UDP and TCP ports are required for client/server
communication. See Table 1 for a list of standard ports required, and
Table 2 for a list of custom ports required.
If you are using a Server behind a firewall, please add ports 1099 and
40002 to the exception ports in the firewall settings.
Table 1: Standard Ports Required
Port Protocol
67 & 68 UDP
69 UDP
4011 UDP
20 & 21 TCP
5900 TCP
Table 2: Custom HP Device Manager Ports Required
Receiver Sender
Port
1099 Console
40000 Server/
Agent
40001 Gateway
40002 Console
40003 Server/
Agent
Purpose
PXE - Bootstrap.
TFTP (Trivial File Transfer Protocol).
DHCP Proxy Service (this is an alternative to ports
67 and 68 if those ports are not available).
FTP (used for the Repository).
VNC Server.
Receiver Protocol
Server TCP
Gateway UDP
Agent TCP
Server TCP
Gateway TCP
Purpose
Console queries the RMI
Registry.
Server/Agent polls Gateway.
Gateway sends task to Agent.
Console calls the remote
objects on Server by RMI.
Server sends task to
Gateway;
Agent sends report to
Gateway.