Remote Control; Preparation; Recharging The Battery; Recharging - Panasonic AG-AC130A Operating Instructions Manual

Remote control

When using the remote control, set the [IR REMOTE] on the [OTHER FUNCTIONS] menu to [ON]. The
factory setting is set to [OFF]. (Page 93 of Vol.2)
Take note that the following buttons are for
functions that cannot be executed on this
camera.
• button
• PHOTO SHOT button
PHOTO
EXT
1 SHOT
DISPLAY
DATE/
2 TIME
5
6
SEARCH PLAY
7
8
STILL ADV PAUSE
9
SKIP STOP
10
11 ENTER
Remote control usable range (Page 26)

Recharging the battery

Recharging

The battery is not charged at the time of purchase. Charge the battery before use.
It is recommended that you keep one extra battery as a spare.
1
Connect the power cord to the AC adaptor.
• Disconnect the DC cord. The battery cannot
be charged if the DC cord is connected.
DC cord
Insert until fully in place.
(1)
START/
STOP
3
ZOOM
4
VOL
SEARCH 6
STILL ADV 8
SKIP 10
MENU 12
(2)
1 EXT DISPLAY button
(Page 62 of Vol.2)
2 DATE/TIME button (Page 62 of Vol.2)
3 START/STOP button
Same function as the <START/STOP> button
on the camera.
4 ZOOM/VOL button
(Page 62 of Vol.2)
5 PLAY button (Page 50 of Vol.2)
6 SEARCH button (Page 50 of Vol.2, Page 61 of
Vol.2)
7 PAUSE button (Page 50 of Vol.2)
8 STILL ADV button (Page 62 of Vol.2)
9 STOP button (Page 50 of Vol.2)
10 SKIP button (Page 50 of Vol.2, Page 61 of Vol.2)
11 OPERATION buttons
Same function as the OPERATION lever on the
camera.
12 MENU button
Same function as the MENU button on the
camera.

Preparation

2
Insert the battery.
Charging lamp <CHARGE>
Align the battery with the mark
and insert fully.
21