Table of Contents
Advertisement
Disassembling the LCD Module-15 Inch
1.
First remove the two screw pads then remove the two screws.
2.
Disattach the LCD bezel carefully. Please note that you have to push forward at the two indentations.
3.
Unscrew the two screws then remove the latch.
4.
Unscrew the two screws on the inverter board.
5.
Remove the four screws holding the right and left hinges. There are two screws on each side.
6.
Remove the right and the left hinge.
7.
Dettach the EMI tape and then remove LCD from the cover carefully.
8.
Disconnect the inverter board from LCD FPC.
9.
Disconnect the LCD power connector.
10. Disconnect the LCD FPC.
11. Unscrew the eight screws on the brackets. There are four on each side then remove the brackets.
62
Chapter 3
Advertisement
Table of Contents
