To Remove A 5.25-Inch Storage Device - Acer Altos 11000 System User Manual

5.
Secure the drive with two screw as shown below.
6.
Connect the power cable and signal cables to the external device.
5.2.2

To remove a 5.25-inch storage device:

1.
Open the front panel door and remove the left panel. See section 4 for
more information on opening the housing panels.
2.
Disconnect the power and signal cable.
3.
Detached the external device by removing the screws and gently pull out
the device.
4.
Remove four screws to detach the drive from the drive guide.
System Housing
21