Kit Contents; Tools Required - HP Model 748 - VME Workstation Manual

Pci module

Hide thumbs Also See for Model 748 - VME Workstation:

Kit Contents

Make sure that you have kit A4505A and that it contains the following

items:

• PCI tray assembly

• Boot ROM for Model 743 VMEbus board computer

• IC Removal Tool

• Anti-static Strap (Disposable)

You'll need the following items to install the PCI Module:

• Medium flat-tipped screwdriver.

• Static-free work area.

Prerequisites

Your system must be running version 10.20 or later of the HP-UX operating

system.

The PCI module upgrade does not support HIL devices. You must remove

any devices connected to the HIL interface connector on the EISA tray.

NOTICE:

Before removing your HIL keyboard, use the SAM utility to make sure that

the P/S2 driver is conﬁgured in the HP-UX kernel. Refer to the manual

HP-UX System Administration Tasks (B2355-90079) for information on

conﬁguring the HP-UX kernel.

A4505a