Motorola HT750 - UHF/VHF/Low Band - Radio Service Manual page 56

5-8
Radio Tuning, Programming, Cloning, Lowband Antenna Cutting Procedure, PassPort Tone Options, and Diagnostic Functions
the "*" key for the decimal point, enter the desired Search Frequency in MHz. Press the Select key
when the entry is complete or the Escape/Exit Key to exit the function without entering a search
frequency. After pressing the Select key the radio will exit the Menu mode and begin searching the
entered frequency for a period of time equal to twice the initial search delay. This utility allows a new
radio or a radio with an empty Neighbor List Almanac to search an initial frequency other than its
Home Frequency or a Seed List Frequency. This can be helpful when programming and delivering a
new radio to a customer in an area not served by a site on his Home Frequency.
Clear Almanac – (Clear Neighbor list Almanac): Enter the Service Menu and using the Up/ keys
scroll to "Clear Almanac". Press the Select key. The stored Neighbor frequencies will be erased. This
utility allows clearing obsolete Neighbor frequencies collected.