Ryobi RLS1351 Operator's Manual page 4

 NEVER USE iN AN EXPLOSiVE ATMOSPhERE.
Normal sparking of the motor could ignite fumes.
 iNSPECT TOOL CORDS PERiODiCALLy. If
damaged, have repaired by a qualified service technician at
an authorized service facility. Repair or replace a damaged
or worn cord immediately. Stay constantly aware of cord
location and keep it well away from the rotating blade.
 iNSPECT EXTENSiON CORDS PERiODiCALLy and
replace if damaged.
 POLARiZED PLUgS. To reduce the risk of electric shock,
this tool has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any
way.
 KEEP TOOL DRy, CLEAN, AND FREE FROM OiL AND
gREASE. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
 STAy ALERT AND EXERCiSE CONTROL. Watch what
you are doing and use common sense. Do not operate
tool when you are tired. Do not rush.
 DO NOT USE TOOL iF SwiTCh DOES NOT TURN iT
ON AND OFF. Have defective switches replaced by an
authorized service center.
gENERAL SAFETy RULES
 USE ONLy CORRECT BLADES. Do not use blades with
incorrect size holes. Never use blade washers or blade
bolts that are defective or incorrect. The maximum blade
capacity of your saw is 5 in.
 BEFORE MAKiNg A CUT, BE SURE ALL ADJUST-
MENTS ARE SECURE.
 BE SURE BLADE PATh iS FREE OF NAiLS. Inspect for
and remove all nails from lumber before cutting.
 NEVER TOUCh BLADE or other moving parts during
use.
 NEVER START A TOOL whEN ANy ROTATiNg COM-
PONENT iS iN CONTACT wiTh ThE wORKPiECE.
 DO NOT OPERATE A TOOL whiLE UNDER ThE
iNFLUENCE OF DRUgS, ALCOhOL, OR ANy
MEDiCATiON.
 whEN SERViCiNg use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
 USE ONLy RECOMMENDED ACCESSORiES listed in
this manual or addendums. Use of accessories that are
not listed may cause the risk of personal injury. Instruc-
tions for safe use of accessories are included with the
accessory.
 DOUBLE ChECK ALL SETUPS. Make sure blade is tight
and not making contact with saw or workpiece before
connecting to power supply.
4