Insignia NS-24E340A13 User Manual page 17

Insignia 24" 1080p LED TV
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 1/DVI jack to connect a DVD
or Blu-ray player using DVI. If you use the
HDMI 2/ARC jack, you will not hear sound from the
TV speakers.
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI 1/DVI jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the side of your
TV and to the AUDIO OUT jacks on the DVD or
Blu-ray player.
5 Plug your TV's power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the Input Source list.
8 Press or to select HDMI 1, then press
ENTER.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
DVD or Blu-ray player
USB
Side of TV
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT/AV Y/VIDEO, P
and P jacks on the back of your TV and to the
R
COMPONENT OUT jacks on the component
video device.
Cables are often color-coded
to match color-coded jacks.
Back of TV
3 Connect an audio cable (not provided) to the L
and R audio jacks on the back of your TV and to
the L/R AUDIO OUT jacks on the DVD or Blu-ray
player.
Notes
• The COMPONENT/AV Y/VIDEO, P
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the
L and R audio jacks, the audio output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the Input Source list.
7 Press or to select Component/AV, then
press ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
,
B
DVD or Blu-ray player
, and P
B R
13