Insignia NS-24E340A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 1/DVI jack to connect a
cable or satellite box using DVI. If you use the
HDMI 2/ARC jack, you will not hear sound from the
TV speakers.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 1/DVI jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the side of your
TV and to the AUDIO OUT jacks on the cable or
satellite box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 19.
10
Cable or satellite box
USB
Side of TV
www.insigniaproducts.com
NS-24E340A13 Insignia 24" 1080p LED TV
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT/AV Y/VIDEO, P
and P video jacks on the back of your TV and
R
the component video out jacks on the cable or
satellite box.
Cables are often
color-coded to match
color-coded jacks.
Back of TV
4 Connect an audio cable (not provided) to the
L and R audio jacks on the back of your TV and
to the audio out jacks on the cable or satellite TV
box.
Note
• The COMPONENT/AV Y/VIDEO, P
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the L and R
audio jacks, the audio output is analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 19.
,
B
Cable or satellite box
, and P
B R