Zenith Z19LCD3 - 720p LCD HDTV Operating Manual page 28

Screen Setup for PC mode
Overview
When the RGB input of the set is connected to a PC output, select
the RGB-PC as the main input mode.
After connecting RGB-PC to PC output and checking the screen qual-
ity.
When you change the resolution, select the proper resolution in pre-
sent input to see the best picture appearance.
Adjustment for screen Resolution, Position, Size,
and Phase
Press the ADJUST button and then use • or • button to
select Resolution, Position, Size, or Phase.
Press the ENTER button and then use • • _I • button to
make appropriate adjustments.
• The Phase adjustment range is 0 ~ +63.
• The Size adjustment range is -30 ~ +30.
Press the ENTER button.
@@0
Auto Config.This function is to adjust picture
position and minimizes image shak-
ing automatically.
Resolution This function allows you select
resolution of XGA/WXGA.
Position This function is to adjust picture to
left/right and up/down asyou prefer.
Size This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
Phase This function allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
Reset This function is to initialize the
adjusted value.
m
x
rT1
_e
z
rT1
XD
c
rT1
z
rT1
c
Auto Configuration and Initializing
(Reset to original factory values)
O
Press the ADJUST button and then use • or • button to
select Auto. Config. or Reset.
Press the ENTER button and then use _I or • button to
select Yes.
Press the ENTER button.
@@@
27