Things To Consider Before You Connect; Protect Against Power Surges; Protect Devices From Overheating; Position Cables Properly To Avoid Audio Interference - RCA 32V434T User Manual

Things to Consider Before You Connect
Protect Against Power Surges
• Connect all devices Ix'for(' you plug any of their power cords into the wall outk't.
• Turn off tile TV and/or device before you connect or disconnect any cables.
• (7sing a surge protector can help prevent damage to your T\.' from electrical power surges. In
case of lightning, unplug your TV.
,, Make sure all antennas and cables are properly grounded. Refer to tile Important Saf_,ty
Instructions packed separate]>
Protect Devices from Overheating
,, I)on't block v(,ntilation hok,s on any of the' devk'os. Arrange, tho dovkos so that air can
circulate freely.
,, I)on't stack devices.
,, If you place devices in a stand, make sure you allow adequate ventilation.
,, If you connect an audio receiver or amplifier, place it on the top shelf so tile heated air from
it won't flow around ()tiler devices. Position Cables Properly to Avokl Audio Interference
Position Cables Properly to Avoid Audio Interference
Insort c'ac]l cable firmly into the dosignated jack.
,, If you place devices above tile T\.', route all cables down tile side of tile back of tile T\"
instead of straight down tile middle of tile TV.
,, If your antenna uses 300-ohm twin lead cables, do not coil tile cables. Also, keep tile twin
lead cables away from audio/video cables.
Use Indirect Light
Don't place th(' TV wher(, sunlight ol room lighting will be directed toward the screen. (Tse soft
or indirect lighting.
(;Izphicx (:ozzl(_iz_'d zz'ilbiz/ lhix pztblicaliozz at(, for r_])r(,x_,z/l(_lio_ oz_/),.