Table of Contents
Advertisement
Troubleshooting
Most prob]en_s you encounter
with your TV can be corrected
])y consulting
tile following Troubleshooting
lisT.
TV Problems
TV won't turn on
,,
:vJak_'sure Tilt' TV is plugged
in.
-
Check tile wall receptacle
(or extension
cord) To make sure it is "live" l,y plugging in something
else.
•
Something might be wrong with your remote conTroL Press The POWER buTTon on The front of The TV. If The TV
Turns on, check Tile remoTu conTroL
,,
Tile Front Panel Lock may be oil. Go to [)age 24 for more information.
Buttons don't work
-
The, Front Pan_q Lock may be ot_. Go To page' 24 for mort' information.
TV turns off unexpectedly
',
3'1_'_ I) 7Ynm_ _ might haw, bot,n acTivaTed. Go To page 33 for insTrucTions.
•
7_*w Q/}"-Tgme*" might hav_, been acTivaTed. Go To [)age 33 for insTrucTions.
® Kidl'glxx might have been set. Go To page 23 for insTrucTions.
-
Electronic protection
circuit may havu been activated because
of a power surge. If This happens
ffuquent]y, Tile
voltage in your house may be abnormally
high or low.
TV turns on unexpectedly
',
t_211_'c-_p 71inlm'might have been set. Go To page 33 for instructions.
Blank screen
•
You may be on an inactive channel. Try another channel.
•
Make sure devices connected
To Tile TV are Turned on.
•
If you've connecTud another device (such as a camcorder
or D\"I) player) make sure you select tile Vide() Input
Channel That is used for That device. Use Tile INPUT buTTon To Toggle Through The avatab]e
Video Input Channels.
Digital tuning
delayed
',
You may <,xperk,nco a c/clay of s_'v<'ra] seconds bc'for_' digital pictures
appoar, both wht,n you first Turn on Tilt'
digital signals and when you change channels. This is normal.
No sound, picture okay
•
Maybe th(' sound is muted. Try pressing th(' volume up buTTon to restore sound.
•
If using component
jacks (Y Pb Pr), remember
To also connect The (levice's let} and right au(lio output jacks To The
TV's A1ETI)IO input jacks.
Can't select certain channel
-
Channe] may be blocked
or not approve'el Through PAI4!_ATAL C<).\7140L5.
•
If using a VCR, check To make sure Tile TVi\.'CR buTTon on Tile \T_R is in Tile correct mode (press Tile TVi\.'CR
button on your VCR).
Noisy stereo reception
(analog channels only)
•
May be a weak sTaTion. Change tile 3'ozl_ld 7])'p_to =lloJlo. Go to page 25 for moru insTrucTions.
Chapter
4
Advertisement
Table of Contents
