Table of Contents
Advertisement
154
Configuring Date and Time Settings
This feature allows the user to configure the time and date settings for the
host server and the client computer. When you click the <Time and Date>
icon in the Options window, the following screen will display:
The user can either set the date & time setting manually or use the NTP Server
setting to set date & time. Follow the instructions below to set Date/Time settings.
Note: Time zone is enabled when NTP is selected. The options are
UTC -12:00 hr. ~ +12:00 hr.
1
Click Date/Time on the left to set the date/time settings.
2
Select the time zone.
3
Check this item for NTP settings.
4
Enter the IP address for the primary NTP server.
5
Enter the IP address for the secondary NTP server.
6
Enter the date.
7
Enter the time in hh/mm/ss format.
8
Click Refresh to change the date/time settings.
9
Click Save to save the entries.
Appendix C Acer Smart Console
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
