Connection - Panasonic WV-SW155 Installation Manual

Connection

Before starting the connection, turn off the power of the devices to be connected.
Check and prepare the required devices and cables for connection.
Note:
• Refer to pages 26 and 27 when using the mount bracket (accessory).
• Refer to pages 26 and 27 when using the conduit.
z
Connect a LAN cable (category 5 or better, straight) between a PoE device (such as a hub) and
the network connector of the camera.
<WV-SW155, WV-SW152>
Connect a LAN cable (category 5 or better, straight, STP) between a PoE device (such as a hub)
and the network connector of the camera.
<WV-SW155M, WV-SW152M>
Connect a LAN cable (category 5 or better, straight, STP) between a PoE device with M12 connec-
tors (such as a hub) and the network connector of the camera.
Network cable
RJ-45 (female)
Network cable
M12 connector
23