Panasonic WV-NF284E Installation Manual page 20

Step 11
Rotate the dome cover to move the "❘" indica-
tion to the "LOCK" position.
Fix the dome cover on the main body using
the provided dome cover fixing screw (tap-
ping screw, nominal diameter: ø2.6 mm)
(tightening torque: 0.59 N·m {6 kgf·cm}).
Important:
The hole for the dome cover fixing screw
is located near the "i-Pro" logo. The hole
located near the dome cover lock marker
is the microphone hole. Do not screw
onto this hole.
20
Hole for dome cover
fixing screw
DOME COVER
INSERT ADJUST LOCK
DOME COVER