Kodak i1420 User Manual page 53

48
Image — allows you to select which part of the document you want to
use for creating your electronic image.
• Entire document:
- if you select Document: Automatically Detect and Straighten,
Document: Automatically Detect or Document: Manually
Detect, returns the entire document.
- if you select Document: Photograph, the entire document is
used to locate the photograph.
• Part of the document:
- if you select Document: Automatically Detect and Straighten
or Document: Continuous, returns the portion of the document
which you specify with the Outline options.
- if you select Document: Photograph, only the portion of the
document which you specify with the Outline options will be used
to locate the photograph.
Outline — allows you to select the location and size to use for creating
your electronic image. The preview area will show the outline.
• Origin (x, y):
- if you select Document: Automatically Detect and Straighten
or Document: Photograph, (x) is the distance from the left edge
of the document and (y) is the distance from the top edge of the
document.
- if you select Document: Manually Select or Document:
Continuous, (x) is the distance from the left edge of the
scanner's paper path and (y) is the distance from the first portion
of the document detected by the scanner.
• Size (w, h):
- if you select Document: Automatically Detect and Straighten
or Document: Manually Select, this is the width and height of
the electronic image.
- if you select Document: Photograph, this is the width and height
of the area of the document to use to locate the photograph.
- if you select Document: Continuous, this is the width and height
of each separate electronic image.
NOTE: The electronic image may be shorter than you specified if the
outline goes beyond the end of the scanned document.
• Angle: allows you to select the angle of the outline.
• Predefined sizes: provides a list of commonly used paper sizes.
Selecting an item in this list will automatically set the size of the
outline to that paper's size. Custom will be displayed when the
outline size does not match any sizes in the list.
NOTE: You can also adjust the outline displayed in the preview area
using your mouse.
A-61550 May 2007