American DJ Sunray II User Instructions

American DJ
SUNRAY II
CAUTION!
SPECIFICATIONS: MODEL -
Weight: 16 lbs.
Size: 10" x 10" x 14".
Lamp: ZB-64514 120V 300W
Fuse: 5 AMP
Supply Voltage: 110-120V/60Hz.
Working Position: Any Safe position.
Motor Speed: 6 rpm.
Duty Cycle: 10 min. on, 10 min. off.
INSTALLATION:
After plugging in, unit will rotate slowly at 6 r.p.m.
Caution: Never open unit when in use. Unplug unit and let cool before servicing.
Always remember to replace lamps and fuses with the same wattage, voltage and amperage ratings.
The SUNRAY II™ has no transformer, and is light in weight.
For lamp replacement; unscrew screw on ball, remove cover, replace lamp & reassemble.
For service, contacrt your American DJ® Dealer.
EACH UNIT IS LAMPED AND TESTED BEFORE LEAVING THE FACTORY.
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058
®
Read instructions before installing or plugging unit in.
SUNRAY II™
User Instructions
™
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly suscepti-
b le to damage i f impro p e r l y
handled. Never touch lamp with
bare fingers as the oil from your
hands will shorten lamp life. Also,
never move fixture until lamp
has had ample time to cool.
R e m e m b e r, lamps are not cov-
ered under warranty conditions.