Advertisement
Remember to wash the defrost cleaner in hot soapy
water at regular intervals. Dry throughly before
replacing.
When the frost has reached a thickness of up to
4mm it can be removed using the ice scraper
provided with the appliance. During this operation it
is not necessary to disconnect the appliance from
the mains and remove the food. Never use metal
tools for this operation.
For complete defrosting (once or twice a year)
proceed as follows:
-
turn the thermostat control knob to the «OFF»
position (O) or disconnect the appliance from the
mains.
-
Remove any food from inside the freezer and
fridge, wrap it in several sheets of newspaper and
store in a cool,dry place.
-
Leave the door open and insert the ice scraper
under the channel in the centre of the lower part
of the appliance; place a low-sided container
beneath the scraper to collect the water.
- Clean and dry thoroughly.
- Replace the scraper in one of the drawers .
-
Reconnect the appliance to the mains or reset
the thermostat control knob to a functioning
position.
-
After letting the appliance run for a least half an
hour, replace the previously removed food into
the compartment.
When defrosting the freezer, the fridge is also
controlled by the thermostat and will not be
operational during this period. A temperature rise of
the frozen food packs, during defrosting, may
shorten their safe storage life.
D068
9
Advertisement
