Specifications; Warning Labels On The Machine; Symbols On The Machine - Zenoah HBZ2602 Owner's Manual

HB2302 / HBZ2602
2. Specification
Model
Dimesion (L x W x H) **
Dry weight*
Fuel tank capacity
Engine Type
Displacement
Air filter
Carburetor
Ignition system
Spark plug
Muffler
Operating Engine Speed
Fuel consumption
Air Volume*
Max. Air Velocity*
* with standard pipe ** without pipe
Specifications are subject to change without notice.

3. Warning labels on the machine

Keep all children, bystanders and help-
ers 15meters away from the machine.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).

4. Symbols on the machine

For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER
The direction to open the choke
Position: AIR CLEANER
GB-4
HB2302
327 x 225 x 360
kg
liter
Air cooled
2-cycle gasoline engine
cm 3
Champion RCJ6Y (Noise-proof)
rpm 2300 to 7600
liter/h
cu.m/min.
m/sec.
(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result in accidents caus-
ingserious injury or death. Read this manual carefully and prac-
tice using the blower until you are fully acquainted with all op-
erations and have learned to use it correctly.
(4) Severing of fingers or hand by fan blade
Do not open or remove safety guards or nets while engine is
running.
(5) Thrown or blown object
Stay a safe distance from the machine.
(6) Hot surface
Avoid contact the hot surface during and immediately operation.
3.9
0.75
22.5
Dry polyurethane foam
Diaphragm, rotary valve type
T.C.I.
Spark arrester equipped
0.80
10
55
Never modify your machine.
We won't warrant the machine, if you use the
remodeled blower or if you don't observe the
proper usage written in the manual.
The direction to the start of ignition switch
Position: IGNITION SWITCH ON THE CON-
TROL HANDLE
The direction to stop the engine
Position: IGNITION SWITCH ON THE CON-
TROL HANDLE
HBZ2602
327 x 269 x 360
4.2
0.65
Strato-charged air cooled
2-cycle gasoline engine
25.4
C.D.I.
NGK CMR7H (Noise-proof)
2800 to 7600
0.58
10
55