Using Burst Modes (Continuous/Precapture/Bracket); Capturing Continuous Photos; Using Burst Modes; (Continuous/Precapture/Bracket) - Samsung WB2100 User Manual

Using burst modes

It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes.

Capturing continuous photos

1
In Shooting mode, press [t].
2
Select an option.
Icon Description
Continuous (8 fps): Capture 8 photos per second continuously.
(You can capture up to 7 photos in one burst.)
Continuous (5 fps): Capture 5 photos per second continuously.
(You can capture up to 7 photos in one burst.)
Continuous (3 fps): Capture 3 photos per second continuously.
(You can capture up to 7 photos in one burst.)
Single: Capture a single photo.
(Single is not a burst option.)

(Continuous/Precapture/Bracket)

3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press and hold [Shutter].
•
While you are pressing [Shutter], the camera captures photos continuously.
•
You can use the Face Detection, flash, timer, and ACB only when you select
Single.
•
Depending on the Face Detection option you selected, some Burst options may
not be available.
•
It may take longer to save the photos depending on the memory card capacity
and performance.
•
In some modes, you can also set a a burst option by pressing [m], and then
selecting Drive/Timer.
75
Shooting options