Device Settings
General Sound Settings
Silent Mode
Use the Silent mode setting when you want to stop the
phone from making any noise. In this mode, the
speaker is muted and the phone only vibrates to notify
you of incoming calls, or other functions that normally
have a defined tone or sound as an alert.
Press and hold the volume button down in standby
mode until
displays.
– or –
Press
and tap
mode,
then tap
Off
Adjusting the Volume
Adjust the volume settings for both the device and
Media playback to suit your needs and
environment.
1.
Press
and tap
44
2C. Settings
> Settings > Sound > Silent
,
Vibrate
, or
Mute
.
> Settings > Sound
2.
Tap Volume and drag each of the volume type
slides left (to decrease volume) or right (to increase
volume). Selections are:
other media
Tip:
You can adjust the ringtone volume in standby mode (or
the earpiece volume during a call) by using the volume
button on the left side of your device.
3.
Tap
OK
Ringtone and Notifications Settings
Set up the device ringtone, device vibration, and
sounds for default notifications. You can also set up
sound and vibration for the phone and notifications.
1.
Press
2.
Configure the following options:
Device ringtone
from the list.
Device vibration
ringtone from the list. Or tap
your own custom device vibration ringtone.
.
Default notifications
notification ringtone from the list.
Music, video, games, and
,
,
Ringtone
Notifications
when finished.
and tap
> Settings > Sound
: select a default phone ringtone
: select a default phone vibration
Create
: select a default phone
, or
.
System
.
and create