Usage Of The Drain Hose - Haier HWM72-27S User Manual

Please install and adjust the machine according to the requirement of
the manual. It is very important to your security and correct
operating the machine.

Usage of the drain hose

The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 1.2m ,
or the drainage will not be smooth enough and cause
incomplete drainage.
2.Do not step on or press the drain hose.
Install the water inlet hose; Select the water level
Insert the water inlet hose into the water-filling entrance on
the control panel directly. (Pull it out to dismantle it)
Select water level according to the quantity of the laundries.
Adjust the water level adjusting lever to desired water
level line.
Attention:
In water filling, do not exceed the"Maximum" water level.
Otherwise the water may overflow out of the washing
machine.
Install the lint filter
After opening the package, please take out the lint
filter from the document bag, install it to the overflow
filter of the wash tub. See to the figure.
0.7m<H 1.2m
H
Water inlet hose
Water level
adjusting lever
Max.
Maximum
(about 55L)
Med.
Medium
(about 46L)
Min.
Minimum
(about 36L)
Overflow filter
4
Water-filling
entrance
Lint filter