Haier HWM72-27S User Manual page 10

Wash selector
(standard current,
gentle current)
Wash timer
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
STANDARD
OFF
GENTLE
3
15
DRAIN
12 6
WASH SELECTOR
9
WASH TIMER
Wash
1.Water-filling selector
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Water-filling entrance
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
BUZZER
8
Water-filling selector handle
Overfilling sign
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
WASH SPIN
Figure 1
Figure 2
STANDARD
GENTLE
DRAIN
WASH SELECTOR
Figure 3
OFF
3
12 6
9
Figure 4
WASH TIMER
STANDARD
GENTLE
DRAIN
WASH SELECTOR
Figure 5