Specification - Haier HWM70-918NZP User Manual

Phenomena
The spinning is intermittent when it starts.
Push the "spin" button to select "Spin", but it doesn't
work.
There may be some water flowing out of the drain hose
in the first use of the machine.
The wash procedure is paused.
The pulsator pauses during water inlet in wash
and rinse.
When the power plug is inserted,computer board
indicator is switched on, and the machine starts
working.
Specifi cation
Injection pressure
Washing / Spinning capacity
Explanation
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is
needed before it starts spinning.
It is the water remained in the factory inspection of
performance.
The cloth sensor is checking the cloth, it will add
water after 48 seconds.
It is to avoid splashing during water inlet.
It is the special resume function. In the case of power
failure or the power plug is loose during washing, the
machine can save the running program, and resume
the program after the power supply is recovered. You
do not need to set the program again.
0.001 MPa —1.0 MPa
7.0kg/7.0kg