Changing The Administrator User Name; Changing The Administrator Password; Enabling Ldap Server Authentication For Lmc - Lexmark C792 Administrator's Manual

Monitoring and maintaining the system

Changing the administrator user name

1
In LMC, click the System tab.
2
Select Username & Password from the System list.
3
Type the new user name.
4
Re‑type the new user name to confirm it.
5
Click Apply.

Changing the administrator password

1
Click the System tab.
2
Select Username & Password from the System list.
3
Type the current password.
4
Type the new password, and then re‑type it to confirm.
5
Click Apply.

Enabling LDAP server authentication for LMC

The administrator can set up a connection with an LDAP server to authenticate user names and passwords other than
those for the administrator account.
1
Select LDAP Setup from the System list.
2
Select the Enable LDAP Authentication check box.
3
If your LDAP server requires a secure connection, then select Use Secure Connection (SSL/TLS).
4
Type the LDAP server address and server port.
Note: Port 389 is typically used for non‑secure communication, and Port 636 is typically used for secure
communication.
5
In the User Search Filter field, type the attribute used in the directory to identify a user name, such as cn, sn,
uid, or sAMAccountName.
6
In the User Search Base field, type the relative distinguished name where a subtree search for a user should begin
in the directory, such as ou=Employees.
7
Do the following to filter the search to users in specific groups:
a
In the Group Search Filter field, type the attribute used to identify a member of the group, such as member or
uniquemember.
b
In the Group Search Base field, type the relative distinguished name where a subtree search should begin in the
directory for groups, such as ou=Groups.
c
In the "Member of Group(s)" field, type a comma‑delimited list of group names to search. The user name must
be a member of at least one of the groups listed.
d
In the Group Identifier field, type a name for the object class.
Note: The object class name can be used to search for the group base when assigning privileges to groups.
38