Lexmark C760 Service Manual page 144

5060-4xx
Step B
Step Action and questions
1 Check Tray 1 for damage to the pick arm lift bellcrank
activation tabs on the rear of the tray.
Is there any damage to the tray?
2
Check the following parts for damaged, loose, or
missing parts.
• Pick arm lift bellcrank
• Bellcrank lift spring
• Tray interlock bellcrank
Are any of the parts broken, loose, or missing?
3 Verify the autocompensator is not stuck in the up
position (tires or hub caught on the upper deflector)
Step C
Step Action and questions
1 Can you remove Tray 1 from the printer?
2 Open the lower jam access door and carefully lift the
autocompensator assembly until it is in its uppermost
position, and carefully try to remove tray 1.
Can you remove Tray 1?
3 Check Tray 1 for damage to the pick arm lift bellcrank
activation tabs on the rear of the tray.
Is there damage to the tray?
4 Check for loose or broken parts on the
autocompensator assembly.
Are there loose or broken parts?
5 Check the following parts for any signs of damaged or
broken parts.
• Pick arm lift bellcrank
• Pick arm bellcrank lift spring
Are there any damaged or broken parts?
2-108
Service Manual
Yes No
Replace tray 1 Go to step 2
Repair or replace Go to step 3
parts as
necessary
Dislodge the Replace the
autocompensator "Autocompensa
assembly. tor pick
assembly" on
page
Yes No
Go to step 3 Go to step 2
Go to step 3 Determine what
is causing the
tray to stay in a
locked position.
Repair as
necessary
Replace tray 1 Go to step 4
Replace the Go to step 5
autocompen-
sator assembly
Repair or replace Determine what
parts as is causing the
necessary autocompen-
sator to stay in
the down
position. Repair
as necessary.
4-20.