Table of Contents
Advertisement
S
H
WITCH TO
UB OR
These connections can be accomplished in a number of ways using a normal cable.
• A 10BASE-T hub or switch can be connected to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP
cable.
• A 100BASE-TX hub or switch can be connected to the Switch via a twisted-pair Category 5 UTP/STP cable.
• A 1000BASE-T switch can be connected to the Switch via a twisted pair Category 5e UTP/STP cable.
• A switch supporting a fiber-optic uplink can be connected to the Switch's SFP ports via fiber-optic cabling.
Figure 3- 3. Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover cable
NOTICE: When the SFP transceiver acquires a link, the associated integrated 10/100/1000BASE-
T port is disabled.
Connecting the Switch - Switch to Hub or Switch
D-Link™ Hardware Installation Guide – DES-3200 Series Switch
S
WITCH
Page | 23
Advertisement
Table of Contents
