Gigabit Combo Ports - D-Link DES-3205 Hardware Installation Manual

G C
IGABIT OMBO
Each of the five switches in the DES-3200 Series features either two or four Gigabit Ethernet Combo ports. These
ports are 1000BASE-T copper ports (provided) and Mini-GBIC ports (optional). See the diagram below to view the
two Mini-GBIC port modules being plugged into the Switch. Please note that although these two front panel
modules can be used simultaneously, the ports must be different. The GBIC port will always have the highest
priority.
The Switch is equipped with SFP (Small Form Factor Portable) ports, which are to be used with fiber-optical
transceiver cabling in order to uplink various other networking devices for a gigabit link that may span great
distances.
These SFP ports support full-duplex transmissions, have auto-negotiation, and can be used with the following SFP
transceivers: DEM-310GT (1000BASE-LX, Single-mode), DEM-311GT (1000BASE-SX, Multi-mode), DEM-
312GT2 (1000BASE-SX, Multi-mode), DEM-314GT (1000BASE-LH, Single-mode), DEM-315GT (1000BASE-ZX,
Single-mode), DEM-210 (100BASE-FX, Single-mode), DEM-211 (100BASE-FX, Multi-mode), and the following
WDM transceivers: DEM-330T (Single-mode), DEM-330R (Single-mode), DEM-331T (Single-mode), and DEM-
331R (Single-mode). In addition, the DES-3200-28F SFP ports can be used with DEM-220T (BiDi 100BASE-BX)
and DEM-220R (BiDi 100BASE-BX) SFP transceivers.
Introduction - Gigabit Combo Ports
D-Link™ Hardware Installation Guide – DES-3200 Series Switch
P
ORTS
Figure 1- 19. Inserting the Mini-GBIC modules into the Switch
Figure 1- 20. Installing the Mini-GBIC Module
Page | 18