Table of Contents
Advertisement
USING THE UNIT
MASSAGING LEGS AND FEET
1
Place legs or feet in the wells of the footrest.
•
The footrest is positioned so that the angle lock lever is on the user's right-hand side.
•
Gently place legs or feet into the wells so as not to tip the unit over.
When massaging the calves
2
Press
to turn on the power.
•
The massage will not start until a program has been selected.
3
Select
or
according to the part you want
to massage.
•
An automatic program will start.
•
See Page 7 for a description of the programs.
•
The massage will start in Combined mode. Both massage
indicator lamps will light up.
•
It is also possible to change the massage mode. (See Page 7)
4
The unit will automatically stop when the massage has finished.
•
Operation will stop when the set program has finished. (Approx. 15 minutes)
To stop operation during a massage, press
•
All operation of the unit will stop.
When massaging the feet
• F eet are placed in the center of
the massage section.
Buttons
start flashing.
.
6
Advertisement
Table of Contents
