Logo Capture; Logo Display - Panasonic PT-L735NTU Operating Instructions Manual

NOTE:
B The letters which cannot be
input will be displayed in gray,
and cannot be selected in
CHANGE TEXT.

LOGO DISPLAY

A logo can be displayed before
projection.
ON
LOGO DISPLAY is enabled.
OFF
LOGO DISPLAY is disabled.
LOGO CLEAR
Captured logo data can be cleared.
Press the ENTER button to display
the confirmation screen, and then
select "OK".

LOGO CAPTURE

A logo can be captured from the
picture being projected. Press the
ENTER button to display the
capture adjustment screen.
Capturing frame
# Use the F G I H buttons to
move the capturing frame to the
area you want to capture.
$ Press the ENTER button.
C The letters "CAPTURE ..." and
the progress status will be
displayed while logo capture is
being carried out.
NOTE:
B The size of the capturing frame
varies depending on the
signals being input.
B Fine images such as
landscapes may be unable to
be captured.
B Only RGB signals can be
captured. (Except 525i, 625i,
525p, HDTV60, HDTV50, and
750p. Refer to page 62 for
details.)
B Images with 512x384 pixels
can be captured.
B It is recommended that you
input XGA signals, and set
KEYSTONE to "0" when
carrying out LOGO CAPTURE.
E -51
NGLISH