Panasonic HC-V520K Owner's Manual page 137

Using with a wireless access point connection
∫ If the device is Android (NFC-compatible)
≥ Turn on the NFC function
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later).
(Except for some models)
1
Connect the smartphone to a wireless access point.
≥ When you connect using NFC for the first time, please make connection of this unit and a
wireless access point.
2
Start up the smartphone application "Image App".
3
Touch the smartphone on
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ If the smartphone is connecting to this unit for the first time, a
message is displayed again. Touch [YES].
≥ When the connection is complete, images of this unit is displayed on
the smartphone screen.
≥ This unit will be turned on if it is touched on the
turned off using the LCD screen.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫ If the device is Android (non-NFC-compatible) or iOS
1
Connect the smartphone to a wireless access point.
2
Press Wi-Fi button and touch [Link to Cell].
≥ It will go into connection standby for remote operation.
3
Start up the smartphone application "Image App".
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
(l 126)
of this unit
by a smartphone even when this unit was
- 137 -