If The Wi-Fi Connection Cannot Be Established - Panasonic HC-V520K Owner's Manual

High definition video camera
Hide thumbs Also See for HC-V520K:
Table of Contents

Advertisement

If the Wi-Fi connection cannot be established

≥ Please refer to the operating instruction of the device in use for details about the setting of the
wireless access point or smartphone.
Problem
It cannot connect to the
wireless access point.
The wireless access point
is not detected.
Radio waves of the
wireless access point get
disconnected.
The Wi-Fi connection is
not possible between this
unit and a smartphone.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi
connection will be aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access point and how
to set the security settings.
≥ Make sure the wireless access point is registered in this unit.
(l
149)
≥ The device may be unable to locate the wireless access point
due to problems with the signal. Use [Manual Connection].
(l
128)
(Easy Connection)
≥ Make sure the wireless access point is in the correct WPS
standby mode.
≥ Make sure the PIN code has been correctly input.
(Manual Connection)
≥ Make sure the SSID and password have been correctly input.
≥ Check the Authentication method, Encryption type, and
Encryption key (Password).
≥ The condition may improved by moving the location or
changing the angle of the wireless access point.
≥ If you use another 2.4 GHz band device such as a microwave
oven or cordless telephone nearby, you may interrupt the
signal. Keep a sufficient distance from these types of devices.
(Wireless Access Point Connection)
≥ Make sure the smartphone is properly connected to the
wireless access point by checking the Wi-Fi settings of the
smartphone.
≥ Make sure this unit and the smartphone are connected to the
same wireless access point.
≥ Make sure the wireless access point is registered in this unit.
(l
149)
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and password have been correctly input.
≥ Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone's Wi-Fi
set up.
- 133 -
Check points

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc-v510Hc-v520Hc-v520m

Table of Contents