3.
Gently lift the board off the chassis.
Note: A circuit board >10 cm
image shows. Please follow local regulations for disposal of detached circuit boards.
4.
Gently push the RTC battery sideways (1), then lift it off the mainboard (2).
Note: The RTC battery has been highlighted with the yellow circle as above image
shows. Please follow local regulations for disposal of used batteries.
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
22
2
has been highlighted with the yellow rectangle as above
Veriton N2110G Service Guide