Table of Contents
Advertisement
Security
Parameter
Administrator Password
User Password
Setting an system password
1.
Use the up/down arrow keys to select a password parameter (Set Administrator Password or Set User
Password) menu then press Enter. A password box will appear.
2.
Type a password then press Enter.
The password may consist up to twenty alphanumeric characters (A-Z, a-z, 0-9) with a minimum of three
characters required.
3.
Retype the password to verify the first entry then press Enter again.
4.
Press F10.
5.
Select Yes to save the new password and close the Setup Utility.
Changing the system password
1.
Use the up/down arrow keys to select password parameter (Change Administrator Password or Change
User Password) menu then press Enter.
2.
Type the original password then press Enter.
3.
Type a new password then press Enter.
4.
Retype the password to verify the first entry then press Enter again.
5.
Press F10.
6.
Select Yes to save the new password and close the Setup Utility.
Removing a system password
1.
Use the up/down arrow keys to select password parameter (Change Administrator Password or Change
User Password) menu then press Enter.
2.
Enter the current password then press Enter.
3.
Press Enter twice without entering anything in the password fields.
10
Description
Indicates the status of the supervisor password.
Indicates the status of the User password.
Option
Installed
Not Installed
Installed
Not Installed
Veriton N2110G Service Guide
Hide quick links:
Advertisement
Table of Contents
