Acer Veriton M6618G Service Manual page 131

Step 6:Key the name in "Volume Name" and select "RAID 1" in RAID Level.
Step 7:Select minimum HDD as "Source Hard Drive".
Step 8:Select Menber Hard Drive(s).
Step 9:Specify Volume Size then press "next".
Step 10:Press "next" to finish setup and start create RAID1.
Step 11:It may takes half and hours to create RAID1.After create completely,it will ask to reboot to finish create
RAID1.
2-3:Create a"RAID Ready" System into" RAID 5" with three Hard Drives by'Create RAID Volume
from Existing HDD Drive '.
Step 1:Install WIN7 OS with one SATA HDD.
Step 2:Shut down the system,then add other two serial ATA hard drives in the system.
Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console.
Step 4:Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID volume.
Step 5:Click "Next" at create a RAID volume window.
Step 6:Key the name in "Volume Name" and select "RAID 1" in RAID Level.
123
Picture10
Chapter 7