Should support 1.44MB/3 mode 3.5" Devices
•
Extension slot
1 * PCIE x16 (PCIE V2.0)
•
2 * PCIE x1 (PCIE V2.0)
•
Buzzer
1 on board buzzer
•
Rear I/O connectors
1 D-Sub port
•
1 DVI-D port
•
1 Display port
•
6 USB 2.0 ports
•
1 RJ45 LAN port
•
3 mini audio jacks
•
At least five HD audio in/output
•
2 PS2 keyboard/mouse connector
•
1 serial port
•
On-board connectors
1 LGA 1155 CPU socket
•
4 DDR3 DIMM memory sockets
•
1 PCI Express x16 slot
•
2 PCI Express x 1 slot
•
1 PCI slot
•
1 FDD header
•
5 SATA connectors( (6Gb/s*1 for Q65. must use different color to define, others should be SATAII. )
•
Four 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification)
•
One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors
•
One 4 pin CPU Fan connector
•
One 3 pin(co-lay 4pin) System Fan connector with linear circuit
•
One 4 pin SPDIF header closed to PCIEx16 slot
•
One 24 pin ATX interface PS3/PS2 SPS connector.
•
One 2*7 pin front panel IO header
•
One Jumper for clear CMOS
•
One on board buzzer
•
One 2pin OBR header
•
Two reserved 2pin GPIO connector
•
One Serial port header (COM2) (near rear IO is preferable)
•
One 2pin Intrusion Alarm connector
•
One LPT 2*13pin header (near rear IO is preferable)
•
One 2*4 pin internal speaker header
•
One 3pin ME enable/disable connector (with 1 jumper)
•
1 a debug port XDP Connector(BOM option)
•
4
Chapter 1