Asus RS100-X5 - 0 MB RAM User Manual page 32

6. Secure the hard drive with four
screws.
7. Connect the other end of the
Serial ATA signal connector to the
onboard SATA connector labeled
SATA1. Refer to illustration for the
location of the SATA1 connector.
To install a secondary Serial ATA drive:
1. Locate the secondary Serial ATA
drive bay between the optical disc
drive and power supply unit.
-1
P5GC-MR.SATA.Connectors
Optical.disc.drive
Secondary.SATA.drive.plate
Chapter 2: Hardware setup
SATA1 SATA2
Power.supply.unit