Removing The Base - NEC LCD22WV-BK - AccuSync - 22" LCD Monitor User Manual

Quick Start

Removing the Base

Note: Always remove the Base when shipping the LCD.
1. Place monitor face down on a non-abrasive sur
face.
2. Using your thumbs, press the quick release button
to unlock the stand.
3. Pull the unlocked base off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a fl exible arm. Please use the attached
screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
12mm
4 x 12mm with lock
washer and flat washer
100 mm
Specifi cations
4-SCREWS (M4)
(MAX depth: 8.5 mm)
If using other screws,
check depth of holes.
–continued
M4
100 mm
6
Quick release button
Thickness of Bracket
(Arm) 2.0~3.2 mm
Tighten all
screws.
Weight of LCD assembly:
LCD19WV - 4.2 kg (MAX)
LCD22WV - 5.0 kg (MAX)