Removing The Base Stand - NEC AS231WM-BK User Manual

Non-abrasive surface
Figure R.1

Removing the Base Stand

NOTE: Always remove the Base Stand when shipping the LCD.
1. Place monitor face down on a non-abrasive surface (Figure R.1).
2. While using your thumbs, press button downward to unlock base stand.
3. Pull out the unlocked Base Stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm.
Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be
mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS mark).
NOTE: The mounting stand shall be able to sustain at least 20.0 kg and UL certified.
Specifications
4-SCREWS (M4)
(MAX depth: 10 mm)
If use other screw,
check depth of hole.
Figure R.2
12 mm
4 x 12 mm with lock washer
and flat washer
Weight of LCD assembly: 5.0 kg (MAX)
English-7
M4
100 mm
100 mm
Figure R.3
Thickness of Bracket
(Arm) 2.0 ~ 3.2 mm
Tighten all screws