Table of Contents
Advertisement
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE:
Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
INPUT SOURCE
Use the Input Source menu to select between different video signals that may be connected to your monitor.
Auto Select
Select Auto Select to scan for available input signals.
VGA
Select VGA input when you are using the analog (VGA) connector. Push
HDMI
Select HDMI input when you are using the Digital (HDMI) connector. Push
COLOR SETTINGS
Use the Color Settings menu to adjust the monitor's color settings.
to select the VGA input source.
to select the HDMI input source.
Hide quick links:
Advertisement
Table of Contents
