Yamaha Portable Grand DGX-640 Owner's Manual page 87

Function Setting List
Category Function Item
Style Volume
VOLUME
Song Volume
Transpose
Tuning
Pitch Bend Range
Split Point
OVERALL
Touch Sensitivity
Chord Fingering
Main Volume
Main Octave
Main Pan
MAIN VOICE
Main Reverb Level
Main Chorus Level
Main DSP Level
Dual Volume
Dual Octave
Dual Pan
DUAL VOICE
Dual Reverb Level
Dual Chorus Level
Dual DSP Level
Split Volume
Split Octave
SPLIT VOICE Split Pan
Split Reverb Level
Split Chorus Level
Range/Settings
000–127 Determines the volume of the Style.
000–127 Determines the volume of the Song.
-12–+12 Determines the pitch of the instrument by semitone increments.
-100–+100 Sets the pitch of the instrument's sound in 1-cent increments.
01–12 Sets the pitch bend range in semitone increments.
Determines the highest key for the Split voice and sets the Split "point"—in
other words, the key that separates the Split (lower) and Main (upper) voices.
021(A-1)–108(C7)
The Split Point setting and Accompaniment Split Point setting are automati-
cally set to the same value.
1(Soft),
2(Medium),
Determines the sensitivity of the feature.
3(Hard),
4(Off)
Sets the chord detection mode. In the Multi Finger mode both normal chords
and simple chords played to the left of the split point are detected. In the Full
1(Multi Finger),
Keyboard mode normal chords played anywhere on the keyboard will be
2(FullKeyboard),
detected, and the notes played will be sound as well. In the AI Fingered
3(AI Fingered)
mode, less than three notes can be played to indicate the chords (based on
the previously played chord, etc.).
000–127 Determines the volume of the Main voice.
-2–+2 Determines the octave range for the Main voice.
000 (left)– Determines the pan position of the Main voice in the stereo image. The value
64 (center)– "0" results in the sound being panned full left; the value "127" results in the
127 (right) sound being panned full right.
000–127 Determines how much of the Main voice's signal is sent to the Reverb effect.
000–127 Determines how much of the Main voice's signal is sent to the Chorus effect.
000–127 Determines how much of the Main voice's signal is sent to the DSP effect.
000–127 Determines the volume of the Dual voice.
-2–+2 Determines the octave range for the Dual voice.
000 (left)– Determines the pan position of the Dual voice in the stereo image. The value
64 (center)– "0" results in the sound being panned full left; the value "127" results in the
127 (right) sound being panned full right.
000–127 Determines how much of the Dual voice's signal is sent to the Reverb effect.
000–127 Determines how much of the Dual voice's signal is sent to the Chorus effect.
000–127 Determines how much of the Dual voice's signal is sent to the DSP effect.
000–127 Determines the volume of the Split voice.
-2–+2 Determines the octave range for the Split voice.
000 (left)– Determines the pan position of the Split voice in the stereo image. The value
64 (center)– "0" results in the sound being panned full left; the value "127" results in the
127 (right) sound being panned full right.
000–127 Determines how much of the Split voice's signal is sent to the Reverb effect.
000–127 Determines how much of the Split voice's signal is sent to the Chorus effect.
The Functions
Description
Owner's Manual
87