Auto Paper Selection Setting; Registration Adjustment; Clear All Job Log Data - Sharp MX-2300N System Settings Manual

Auto Paper Selection Setting

The paper types* that the Auto Paper Selection function
will select can be specified. Select one of the following
settings:
• Plain Paper
• Plain and Recycle Paper
• Recycle Paper
Select the desired paper type setting and touch the [OK]
key.
The Auto Paper Selection function will not select any
paper types other than the paper types specified with
this setting.
* The paper type set for each paper tray using
Tray Settings" (page 25) in the system settings
(general).

Registration Adjustment

If the colour of text or lines is off when colour printing is
performed, the colours CMY can be adjusted using K
(black) as a reference.
To perform this adjustment, touch the [Auto Adjustment]
key. A message will appear. Touch the [Execute] key.
If auto adjustment is not successful, the [Auto
Adjustment] key will be temporarily disabled to prevent
repeated execution. The next time the registration
adjustment screen is opened after moving to another
screen, the key will return to normal.
Optimization of the Hard Disk
This function optimizes the hard drive of the machine by
defragmenting data. If a job is in progress, a message
will appear and optimization will not begin until the job is
finished. During optimization, the following operations
are not possible:
• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of
the machine.
• Auto Power Shut-Off
When optimization is completed, the machine will
automatically restart.
When the document filing function is frequently used
and output of files seems somewhat slow, optimizing
the hard drive may improve performance.
Tandem Connection Setting
This setting is used to configure the IP address and port
number of the slave machine when you wish to use two
machines (which are used as TCP/IP network printers)
in a tandem connection for printing.
System Settings
Tandem Connection Setting
IP Address of Slave
Machine
Port Number
Tandem Mode
"Paper
For each entry box, select the box, enter the appropriate
value with the numeric keys, and touch the [OK] key.
To disable the sending of tandem printing jobs, select the
[Disabling of Master Machine Mode] checkbox
touch the [OK] key. (Normally this setting is not necessary.)
To disable the reception of tandem printing jobs, select
the [Disabling of Slave Machine Mode] checkbox
and touch the [OK] key. (Normally this setting is not
necessary.)

Clear All Job Log Data

This is used to clear the entire job log. (There is normally
no need to use this function.)
A log file is kept of jobs run on the machine. The job log
can be used to check general use of the machine. The
job log can be written to a computer in CSV format using
a Web browser.
Detect Standard in Auto Colour
Mode
When colour mode is set to auto in copy mode, five
levels are available for the detection of the original.
Specify the number with the
"Closer to B/W" setting is configured, it makes the
original easier to be detected as black and white original.
When the "Closer colour" setting is configured, it makes
the original easier to be detected as a colour original.
96
0
0
5 0 0 0 1
Disabling of Master
Machine Mode
• The factory default setting for the port number is
[50001]. Unless you experience difficulty with this
setting, do not change the port number.
• To use the tandem function when user
authentication is enabled, the same user
information must be stored on both the master
machine and slave machine. If the same user
information is not stored, the page count may not be
added to the appropriate user count or only the
master machine may print.
OK
0 0
Disabling of Slave
Machine Mode
and
keys. When the