Resetting The Drum Counter; Loading Printing Paper - Sharp FO IS125N - B/W Laser - All-in-One Service Manual

9. Resetting the drum counter

Each time you install a new drum cartridge, follow the steps below to
reset the drum counter to zero.
1) Press and then
INFO
2) Press , then
appears.
START
3) Press .
10. Manually resetting the toner counter
When a new toner cartridge is installed, the toner counter is reset in
Step 9 on the previous page. The procedure below is normally not nec-
essary; however, it can be used in the event that you need to reset the
toner counter manually.
1) Press and then
INFO
2) Press , then
appears.
START
3) Press .

11. Loading printing paper

You can load letter or legal size paper in the paper tray.
Maximum number of sheets
(20-lb. copy bond paper at room temperature)
Letter: Approx. 250 sheets
Legal size: 100 sheets
Caution! Do not use the blank side of paper that has already been
printed on.
1) Fan the paper, and then tap the edges against a flat surface to
even the stack.
2) Pull the paper plate forward
adjust it to the width of the paper
the tray, print side up .
3
1
2
• Maximum stack height should not be higher than the line on the
paper guide.
until [LIFE] appears in the display.
until [CLEAR DRUM COUNTER]
until [LIFE] appears in the display.
until [CLEAR TONER COUNTER]
. Squeeze the paper guide and
1
. Insert the stack of paper into
2
3
3) Push the paper plate back.
• If you loaded legal size paper (or you changed the paper size),
change the paper size setting as explained.
1 – 10
FO-IS125N